Man you just can't catch a break can ya, sad thing is that it would have been just as easy to do it right as doing it that way unless they just didn't want to wait for the right parts to come in or didn't know what they were doing. I think while the pan was off I would check the torque on the mains and rod caps which I'm pretty sure that you already have. But if it's as fast as it looks it will be a fun ride
Brake Lines… There's a good chance they are just flared wrong. You might get lucky and be able to simply cut the flare off and re-flare instead of replacing the entire line. Good Luck
You could always run a air to water intercooler. Then dont have to worry about getting air flow to it. Boosted boiz made 1200whp with the one from cxracing for like 200 bucks i think.
Atleast you got it started! That truck is going to be a blast to drive.
Man you just can't catch a break can ya, sad thing is that it would have been just as easy to do it right as doing it that way unless they just didn't want to wait for the right parts to come in or didn't know what they were doing. I think while the pan was off I would check the torque on the mains and rod caps which I'm pretty sure that you already have. But if it's as fast as it looks it will be a fun ride
Btr shaft rockers wouldn’t fit or cure this issue??
Those lifters don’t require adjustable rocker arms i don’t think but their travel is much shorter so you may still just have the wrong pushrod length.
Would u mind sharing your trans setup for your auto foxbody I've seen your old vids and want to see what works good . Thankd
Brake Lines…
There's a good chance they are just flared wrong.
You might get lucky and be able to simply cut the flare off and re-flare instead of replacing the entire line.
Good Luck
You could always run a air to water intercooler. Then dont have to worry about getting air flow to it. Boosted boiz made 1200whp with the one from cxracing for like 200 bucks i think.
Do you have spacers for the front wheels? How did you achieve that look I don't want my wheels to far inside because they are 15 x 4