Nick’s Garage Gear Shop
————————————————————————–
Nick’s Garage Patreon page. Thanks for your support!
————————————————————————–
Nick’s Garage is on Instagram!
@nicksgarageofficial
————————————————————————–
Nick loves Hemis, and he has rebuilt many of the legendary engines over the years. But today, is a first.
————————————————————————–
Nick’s Garage is proud to be supported by Atlas And K Tool.
————————————————————————–
source
Can't even imagine what kind of mileage it will get…but realistically who cares, at least it's gonna use gas from the pump ⛽
I would like to know what the cost is on just the new parts?
Incredible!!!!
There has to be at least $35,000. worth of parts there. And I might add….Top of the line parts!
this will be cool to watch the progress, especially when you replace the chinese frost plugs with brass ones. lol
Awesome Nick'
Nice!!! Green with envy!!!!!
Hey Nick, I’m an old retired Auto Machinist and while I never bent over a fender, I had the fun of assembling many, many engines over the years. And let me tell you, I’ve never had someone bring in a complete engine in brand new parts. I would love going into work every day if I got to do that all the time! BTW, I walk with a cane now because of picking up all those cast iron blocks and heads so be smarter than me.
Pay carefull attention to that milodon gargage. Burred distributor gear oill shafts, loose pickup tube screens, holes or cracks in the oil pan… seriously junk products. Its a wonder they're in buissness.
Why would cement be in a block.?
I'd like to know what all those cool parts cost?
with such a packege, you can build a fire breather or a torque monster depending of the application.
I'm anxious to see the result.
very good ratio.
The Hemi, the best breathing cylinder head devised by man. Arguably the worst combustion chamber there is.
what a pleasure to have this in your shop . cant wait to see it on the dyno.
I wonder how much weight is being saved with all that aluminum compared to the factory cast iron. It has to be at least 100 lbs.
What does this look like for prices? Let's say for the a 472 or whatever 4.15 stroke by 4.5 bore gets you.
Oh you absolutely need to check the gaps on those rings, very cool build I can’t wait to see how it does
The Stroker Gen II Hemi is going to be a monster when its all done.
What every hot rodder dreams of , ordering every piece to build a 541 inch Stroker HEMI with brand new parts . And to have NICK of NICK'S GARAGE build . HOW SWEET IT IS . WOWSER , YEEHAA
chinese rods sad eagle has went that direction should have went with oliver made in usa..
GET A FHO 604 HEMI 1100HP 900 TQ
I miss those 60's and 70's cars so much.
I think it would be a great engine build series if Nick took us along for every step of the build. From the math to figure out how everything works together and why to the machining of the block and balancing of the rotating assembly. Then the complete step by step, bolt by bolt assembly and dyno testing and tuning. It could be a multi video series in its own playlist. I fresh clean all new build just like many of us have dreamed of doing for our own muscle cars.
Could not help but read the small print on some of the part's box's which was "made in China". Came as a bit of a surprise?
That guy put some big bucks into all that.