#budget #builtnotbought #cheap
i challenged myself to build a BUDGET bone stock 302 block (with supporting mods) and a DIY turbo setup, to see how much power it would make and HOLD! IN STOCK FORM! This is what happened…
VIDEO OF ENGINE BEING BUILT:
FULL PLAYLIST:
BUILD:
-FRESHENED UP STOCK 302 W/ STOCK FLIPPED PISTONS, STOCK RODS, STOCK CRANKSHAFT!
-E7TE HEADS CLEANED NEW VALVE SPRINGS (FOR SUPPORT) & COBRA OEM 1.72 ROCKERS
-STOCK CAMSHAFT, STOCK DISTRIBUTOR, STOCK CAM LIFTERS
-NO GIRDLE STOCK OIL PAN & PUMP W/ HEAD STUDS & ARP OIL DRIVESHAFT (THESE TWIST)
-STOCK INTAKE NO PORTING WITH STOCK 60MM TB AND EGR SPACER
-STOCK FUEL RAILS W/ REGULATOR & 42# FORD INJECTORS (TO GET MORE FUEL FOR TURBO)
-STOCK BALANCER, STOCK FLYWHEEL (MACHINED)
-ON3 MODIFIED TURBO KIT W/ 70MM TURBO HALF WELDED TOGETHER DIY
-STOCK T5 TRANSMISSION W/ BUDGET PIECED TOGETHER PARTS! (YEP IT WHINED TOO!)
-OLD CENTERFORCE SINGLE DISC CLUTCH WITH A SPEC 2+ PRESSURE PLATE
-STOCK 8.8 AXLE W/ UPGRADED JUNKYARD 31 SPLINE DIFF FROM EXPLORER & GEARS
SUPPORT THE CHANNEL: Click the JOIN Button for MEMBERSHIP!
#mustang #foxbody #neomustangs #turbo #Notchback #coupe #svt #cobra #on3performance #turbocharged #mustanggt #built #dynotested #mustangdyno #howto #diy #junkyard #stockblock #stockbottomend
___________________________________________________________________________________
SMASH LIKE, SUBSCRIBE AND BELL FOR NEW VIDEOS! (REMEMBER TURN ON ALL NOTIFICATIONS ON YOUR PHONE/DESKTOP!)
[CONTACTS]
TEE-SHIRTS!:
INSTAGRAM: www.instagram.com/neomustangs
TWITTER:
FACEBOOK PAGE:
EMAIL: NEOMUSTANGS@HOTMAIL.COM
___________________________________________________________________________________
[PLAYLISTS:]
TECH CORNER PLAYLIST:
PROJECT HOTWHEELS:
BLACK CAR:
GRUDGE NIGHT RACING:
DADS CAR:
Can A Bone Stock 302 Make 500 Hp On A Budget? Turbo Fox BodY Mustang
source
That's great for a run around Fox and still have a little fun when you drop the throttle ..
Happy Thanksgiving Dan to you and yours sir!
On3 needs all the support possible
Epa is really giving them hell
Awesome man
Do you run Girdles to keep the block from splitting? I keep hearing of these and want to know more from you on this
That will give some coyotes a run for their money. Great job.
Happy thanksgiving from Maine
When running maf would you recommend switching your maf to the injector size or is that something you can adjust through the tune?
I thought you were tinkering with pops car again lol. Project hot wheels always gives me motivation to keep going with my car. Good job
I just bought the moats quarterhorse I do not have anybody around me to help tune it does anybody know where I could get some help I am in Boise Idaho.
Can this be achievable with speed density?
I was always told 302 and 351 blocks split in half at 500hp and more
Did you buy the car back
Easy with an on3
Okay I may be missing some info about the car but is this car speed density or blow through maf?
What shade of blue is that ? It’s dope
Did you gap the rings? If so, what is your gap now?
Your right at the limits but not dangerous to engine damage, it doesn't seem stressed at all, nothing but
full sends to see what it will do. Love this stuff, thanks for sharing.
When you get your On3 kits. Do you get anything special like the upgraded bearings in the turbo etc.?
I figured a Holley sniper instead of a blow through carb, with E85 and On3 would be a solid set-up.
Still my favorite car on the channel. Just love the color and overall build.
So can I expect the same numbers out my pushrod sn-95. Whith close to the same build setup?
Not sure why you would even want to…they can't take a corner for shit. Such an overrated car